In this situation strace also known as system-call tracer comes for rescue. It is a debugging tool that monitors the system calls used by a program and all the signals it receives.
A system call is the most common way programs communicate with the kernel. System calls include reading and writing data, opening and closing files and all kinds of network communication. Under Linux, a system call is done by calling a special interrupt with the number of the system call and its parameters stored in the CPU's registers.
Using strace is quite simple. There are two ways to let strace monitor a program.
Method 1:
To start strace along with a program, just run the executable with strace as shown below.
strace program-nameFor example let us trace ls command.
$ strace ls
execve("/bin/ls", ["ls"], [/* 39 vars */]) = 0
brk(0) = 0x82d4000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7787000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=76503, ...}) = 0
mmap2(NULL, 76503, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7774000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libselinux.so.1", O_RDONLY) = 3
read(3, "177ELF111���������3�3�1���@G��004���"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=104148, ...}) = 0
mmap2(NULL, 109432, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x41d000
mmap2(0x436000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x18) = 0x436000
close(3) = 0
.
.
fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7613000
write(1, "01.c a.outn", 1201.c a.out
) = 12
close(1) = 0
munmap(0xb7613000, 4096) = 0
close(2) = 0
exit_group(0) = ?
In the above example we are not displaying the complete output of strace command. Even though output from strace looks very complicated, this is only due to many system calls made when loading shared libraries. However, once we have found which system calls are the important ones (mainly open, read, write and the like), the results will look fairly intuitive to us.Method 2:
If we want to monitor a process which is currently running we can attach to the process using –p option. Thus we can even debug a daemon process.
strace –p <pid-of-the-application>For e.g
#include <stdio.h>
#include <unistd.h>
int main()
{
sleep(20);
return 0;
}
We will compile the above code and run it as a background process. Then we try to monitor the program using its process id as shown below.$ gcc main.c $ ./a.out & [1] 1885 $ strace -p 1885 Process 1885 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...>) = 0 exit_group(0) = ? Process 1885 detached [1]+ Done ./a.outIn contrast to a debugger, strace does not need a program's source code to produce human-readable output.
Some handy options
Below example is used in the discussion of other important options supported by strace.
#include <stdio.h>
int main(void)
{
FILE *fd = NULL;
if(fd = fopen("test","rw"))
{
printf("TEST file openedn");
fclose(fd);
}
else
{
printf("Failed to open the filen");
}
return 0;
}
Providing the time taken by multiple system calls in a program
Using –c option strace provides summary information on executing a program.
It provides information like number of times a system call is used, time spent executing various system calls, number of times errors returned as shown below.
$ strace -c ./a.out Failed to open the file % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 91.47 0.004000 4000 1 execve 8.53 0.000373 124 3 3 access 0.00 0.000000 0 1 read 0.00 0.000000 0 1 write 0.00 0.000000 0 3 1 open 0.00 0.000000 0 2 close 0.00 0.000000 0 3 brk 0.00 0.000000 0 1 munmap 0.00 0.000000 0 3 mprotect 0.00 0.000000 0 7 mmap2 0.00 0.000000 0 3 fstat64 0.00 0.000000 0 1 set_thread_area ------ ----------- ----------- --------- --------- ---------------- 100.00 0.004373 29 4 total
Redirecting the output to a file
Using -o option we can redirect the complex output of strace into a file.
$ strace -o <output-file-name> <program-name>
Time spent per system call
Using –T option we can get time spent per system call. In the below example we can see time spent per system call is printed at the end of the line.
$ strace -T ./a.out
execve("./a.out", ["./a.out"], [/* 39 vars */]) = 0 <0.003256>
.
brk(0x9db0000) = 0x9db0000 <0.000123>
open("test", O_RDONLY) = -1 ENOENT (No such file or directory) <0.000154>
fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 <0.000125>
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77d4000 <0.000121>
write(1, "Failed to open the filen", 24Failed to open the file
) = 24 <0.000258>
exit_group(0) = ?
Prefixing time of the day for every line in trace
It is useful sometimes to track at what time a particular is triggered. By using -t option strace will prefix each line of the trace with the time of day, which will be really helpful to find out at particular time at which call is the process blocked.
$ strace -t ./a.out
execve("./a.out", ["./a.out"], [/* 39 vars */]) = 0 <0.003256>
.
brk(0x9db0000) = 0x9db0000 <0.000123>
open("test", O_RDONLY) = -1 ENOENT (No such file or directory) <0.000154>
fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 <0.000125>
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77d4000 <0.000121>
write(1, "Failed to open the filen", 24Failed to open the file
) = 24 <0.000258>
exit_group(0) = ?
Tracing only specific system calls
Using –e option we can also specify which system calls to be traced. To trace only open() and close() system calls use the following command:
$ strace –e trace=’open,close’ <program-name>Similarly we can also use negation option to not trace specific system calls. If we don’t want to trace open() system call in previous example we can give the below command
$ strace -e trace='!open,close' ./a.outCheck the man page of strace for other options.
No comments :
Post a Comment
Your comments are moderated